Monel 400 Seamless Pipe Suppliers
Monel 400 Pipe supplier, Monel 400 Welded Pipe distributor, Alloy 400 Pipe manufacturer in India, Monel 400 Pipe material, Monel 400 Pipe Stockist, Monel Alloy 400 Exhaust Pipe suppliers, SCH40 Monel 400 pipe dealers in Mumbai, India.
Monel 400 Pipe
Monel 400 Welded Pipe
Monel 400 Seamless Pipe
Monel 400 Square Pipe Supplier, Monel 400 Seamless Pipe, Monel Alloy 400 Round Pipe, Monel 400 Pipe material Manufacturer in India.
We are No1 Monel 400 Pipe supplier, UNS N04400 Welded Pipe is a nickel-chromium-iron-molybdenum alloy that possesses an exceptional combination of oxidation resistance, fabricability and high-temperature strength. ASTM B619 Monel 400 Seamless Pipes is recommended especially for use in furnace applications because it has unusual resistance to oxidizing, reducing, and neutral atmospheres. Monel WERKSTOFF NR. 2.4360 Pipe has also been found to be exceptionally resistant to stress-corrosion cracking in petrochemical applications. 400 Monel Seamless Pipes is typically used for: Gas turbine operations; Petrochemical; Structural components; Industrial furnace. 400 Monel Pipes has high temperature strength and oxidation resistance. Monel 400 Bush Hex Pipe Used for oxidation resistance upto 1900 deg F, and strength upto 1800 deg. Alloy 400 Hollow Pipe are known for high-temperature strength withstanding up to 2200°F. Alloy 400 Pipe exhibits good ductility after prolonged exposure at temperatures of 1200, 1400, 1600°F (650, 760 and 870°C) for 16,000 hours.
Reliable Steel Distributors is Manufacturer of 400 Alloy Seamless Pipes in india also Exports Monel Pipes since 1997, in 1980 We were incorporated as a Supplier of ASME SB622 Monel Pipe & we became stocking Distributor of Monel 400 Hexagonal Pipe in India. later in year 1990, we were recognised as a leading Distributor of Monel 400 Seamless Pipe in India. we started stocking Monel DIN NR. 2.4360 Pipes of other manufacturers of monel Pipes in Japan & Europe like Kobelco, Sandvik, Sanyo Special Steels & Wuxi, Our widest stock of Monel 400 Welded Pipes enable us for prompt delivery to Middle east, Gulf countries, far east asian countries in any emergency.
Exporter of Monel 400 High Pressure Pipe, Monel 400 oil pipe, 400 Alloy Polish Pipe, Monel Alloy 400 Seamless Pipe.
Reliable Steel Distributors is the only Supplier in india who maintains ASME SB622 Seamless Monel Pipes in all Sizes, we are ISO 9001 & 14000 certified trader of Monel ® 400 Pipes in india, we can offer 400 Monel Welded Pipe at dealer price which proves us that we are one of the best stockist of Monel WERKSTOFF NR. 2.4360 Pipe in India. in year 1995, We became largest Stockist of UNS N04400 Welded Pipe in India, currently we have ready stock of 400 Monel Pipes at our stockyard in Mumbai, Maharashtra, we maintain over 1200 ton ASTM B619 Monel 400 Seamless Pipes in huge variety sizes, shape which makes us one of the Biggest stockist of 400 Monel Seamless Pipes in India.
400 Monel Alloy Seamless Pipe Manufacturer in India, Monel 400 Lined Pipe, Monel 400 Clad Pipe wholesaler in India.
- Monel 400 Pipe Specification
- Monel 400 Pipe Sizes
- Monel 400 Pipe Stock
- Monel 400 Pipe Weight Chart
- Monel 400 Pipe Schedule Chart
- Monel 400 Pipe Pressure Rating
- Monel 400 Seamless Pipe
- Monel 400 Welded Pipe
- Monel 400 Pipe Mechanical Properties
- Monel 400 Pipe Yield Strength
- Monel 400 Pipe Welding Tips
- Monel 400 Pipe Price
- Monel 400 Pipe Project Reference
Specification of Monel 400 Pipe
| Specifications | ASTM B 167 ASME SB 167 / ASTM B 829 ASME SB 829 / ASTM B 517 ASME SB 517 | |
|---|---|---|
| Monel 400 Seamless Pipes size | 4 to 219mm W. T.: 0.5 to 20mm | |
| Monel 400 Welded Pipes size |
|
|
| Monel 400 Pipes Form | Round, Square, Hollow, Rectangular, Hydraulic, Straight Pipess Etc. | |
| Specialized in | Large Diameter Size | |
| Monel 400 EFW Pipes size | 5.0 mm – 1219.2 mm | |
| Monel Alloy 400 Pipes Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF | |
| Alloy 400 Pipes Schedule | SCH5, SCH10, SCH40, STD, SCH80, SCH160 | |
| Alloy 400 Pipes Length | Single Random, Double Random & Cut Length. | |
| Marking | All Monel Alloy 400 Pipess are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.) | |
| End | Plain End, Beveled End, Treaded. | |
| Material Test Certificates (MTC) | Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2 | |
| Manufacturers of Monel 400 Pipes |
|
| Monel 400 Pipes Features | Monel 400 Pipes Applications | Monel 400 Pipes Characteristics |
|---|---|---|
|
|
|
Also Check..
Types of Monel 400 Seamless & Welded Pipes
Seamless Monel 400 Pipes
Monel 400 Welded Pipess
Cold Drawn Monel 400 Pipes
Monel 400 ERW Pipes
Monel 400 EFW Pipes
Perforated Monel 400 Pipes
Hot finished Monel 400 Pipes
Monel 400 Sanitary Pipes
Heavy Wall Monel 400 Pipes
SCH 120 Monel 400 Pipes
SCH 80 Monel 400 Pipes
SCH 60 Monel 400 Pipes
SCH 40 Monel 400 Pipes
SCH 30 Monel 400 Pipes
SCH 20 Monel 400 Pipes
SCH 5 Monel 400 Pipes
SCH 10 Monel 400 Pipes
Mill Finish Monel 400 Pipes
Monel 400 Pipe material
Monel 400 Weld Pipe
Monel 400 Lined Pipe
Monel 400 Seamless Pipe
Monel 400 Welded Pipe
Monel 400 Exhaust Pipe
Monel 400 square Pipe
Monel 400 clad Pipe
Monel 400 flex Pipe
Monel 400 Capillary Pipe
Polished Monel 400 Pipe
Thin-Wall Monel 400 Pipe
Monel 400 Triangle Pipe
Monel 400 Slot Round Pipe
Monel 400 Electropolished Pipe
Monel 400 U Shaped Pipe
Monel 400 Handrail Pipe
Monel 400 Hexagonal Pipe
Monel 400 Precision Pipe
Monel 400 Square Pipe
High Pressure Monel 400 Pipe
Monel 400 Ornamental Pipe
Monel 400 Colour Coated Pipe
Monel 400 Rectangular Pipe
Monel 400 Seamless Pipe, Monel Alloy 400 Welded Pipe & Sch40 Monel 400 Pipe Stocks
|
|
Alloy 400 Pipes Stock List
| Alloy | Monel 400 Pipe form | Monel 400 Pipe Dimension |
|---|---|---|
| ALLOY 400 (66 Ni/34 Cr) | Tube; cold drawn, bright annealed, seamless | 6.35 x 0.89 mm (¼” x 0.035″) |
| MONEL ALLOY 400 (66 Ni/34 Cu) | Tube; cold drawn, annealed | 6.35 x 1.7 mm (¼” x 0.065″) |
| MONEL ALLOY 400 (66 Ni/34 Cu) | Tube; cold drawn, annealed | 12.0 x 2.0 mm |
| ALLOY 400 (66Ni/34 Cu) | Tube; bright annealed, seamless | 12.7 x 0.89 mm (½” x 0.035″) |
| MONEL ALLOY 400 (66 Ni/34 Cu) | Tube; cold drawn, annealed | 12.7 x 1.63 mm (½” x 0.064″) |
| MONEL ALLOY 400 (66 Ni/34 Cu) | Tube; cold drawn, annealed | 19.05 x 2.11 mm (¾” x 0.083″) |
| MONEL ALLOY 400 (66 Ni/34 Cu) | Tube; cold drawn, annealed | 21.34 x 2.11 mm (½”nb Sch10s) |
| MONEL ALLOY 400 (66 Ni/34 Cu) | Tube; cold drawn, annealed | 21.34 x 2.77 mm (½”nb Sch40s) |
| ALLOY 400 (66 Ni/34 Cu) | Tube; cold finished, annealed | 26.67 x 2.11 mm (¾”nb Sch10s) |
| MONEL ALLOY 400 (66 Ni/34 Cu) | Tube; cold drawn, annealed | 26.67 x 5.56 mm (¾”nb Sch160s) |
| MONEL ALLOY 400 (66 Ni/34 Cu) | Tube; cold drawn, annealed | 28.00 x 1.50 mm |
| MONEL ALLOY 400 (66 Ni/34 Cu) | Tube; cold drawn, annealed | 33.40 x 2.77 mm (1″nb Sch10s) |
| MONEL ALLOY 400 (66 Ni/34 Cu) | Tube; annealed, seamless | 33.40 x 3.38 mm (1″nb Sch40s) |
| MONEL ALLOY 400 (66 Ni/34 Cu) | Tube; seamless; annealed | 33.40 x 4.55 mm (1″nb Sch80s) |
| MONEL ALLOY 400 (66 Ni/34 Cu) | Tube; cold drawn, annealed | 48.26 x 2.77 mm (1½”nb sch10s) |
| MONEL ALLOY 400 (66 Ni/34 Cu) | Tube; cold drawn, annealed | 48.26 x 3.68 mm (1½”nb sch40s) |
| MONEL ALLOY 400 (66 Ni/34 Cu) | Tube; seamless, annealed | 48.26 x 5.08 mm (1½”nb sch80s) |
| MONEL ALLOY 400 (66 Ni/34 Cu) | Tube; cold drawn, annealed | 60.33 x 2.77 mm (2″nb sch10s) |
| MONEL ALLOY 400 (66 Ni/34 Cu) | Tube; cold drawn, annealed | 60.33 x 5.54 mm (2″nb sch80s) |
| MONEL ALLOY 400 (66 Ni/34 Cu) | Tube; cold drawn, annealed | 73.03 x 5.16 mm (2½”nb Sch40s) |
| MONEL ALLOY 400 (66 Ni/34 Cu) | Tube; cold drawn, annealed | 88.90 x 5.49 mm (3″nb Sch40s) |
| MONEL ALLOY 400 (66 Ni/34 Cu) | Tube; cold drawn, annealed | 114.3 x 3.05 mm (4″nb sch10s) |
Alloy 400 Pipes weight chart
Monel 400 Pipe Packing & Shipping
Monel 400 Pipe Pressure Rating
| Tube O.D. (in.) |
Wall Thickness of Tube (inches) | |||||||
|---|---|---|---|---|---|---|---|---|
| .028 | .035 | .049 | .065 | .083 | .095 | .109 | .120 | |
| Working Pressure (psig) | ||||||||
| 1/8 | 7900 | 10100 | ||||||
| 1/4 | 3700 | 4800 | 7000 | 9500 | ||||
| 5/16 | 3700 | 5400 | 7300 | |||||
| 3/8 | 3100 | 4400 | 6100 | |||||
| 1/2 | 2300 | 3200 | 4400 | |||||
| 3/4 | 2200 | 3000 | 4000 | 4600 | ||||
| 1 | 2200 | 2900 | 3400 | 3900 | 4300 | |||
Disclaimer: The pressures Shown in the above table are given for reference only. The Dimensioning of piping systems can vary depending on other factors like thermal stresses, external forces, dead weight etc. Design should be made according to regulations from local authorities
Monel 400 Pipe Welding Tips
Monel 400 Pipe is a nickel-chromium alloys that is mainly used in welding. Monel 400 Pipe is most generally used in techniques where high heat tolerance is required. whereas Welding Inconel will be difficult because the welds that are created have a tendency to crack.
Monel 400 Pipe Yield Strength & Chemical Composition Monel Alloy 400 Pipe
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Monel 400 | 0.30 max | 2.00 max | 0.50 max | 0.24max | 28.0-34.0 | 2.50 max | 63.00 min |
Monel 400 Pipe Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Monel 400 | 8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80,000 , MPa – 550 | Psi – 35,000 , MPa – 240 | 40 % |
Monel 400 Seamless and Welded Pipes Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Monel 400 | 2.4360 | N04400 | NW 4400 | NA 13 | МНЖМц 28-2,5-1,5 | NU-30M | NiCu30Fe |
| Properties | Metric | Imperial |
|---|---|---|
| Density | 8.8 gm/cm3 | 0.318 lb/in3 |
Monel Alloy 400 Pipe Weldability of materials
| Table 1: Filler selection for nickel alloys | ||||
|---|---|---|---|---|
| Parent Alloy | Filler designations | Comments | ||
| Alloy | BS EN ISO 18274 | AWS A5.14 | Trade names | |
| Pure nickel | ||||
| Nickel 200 | Ni 2061 | ERNi-1 | Nickel 61 | Matching filler metal normally contains 3%Ti |
| Nickel Copper | ||||
| Alloy 400 | Ni 4060 | ERNiCu-7 | Monel 60 | Matching filler metal contains additions of Mn, Ti and Al |
| Nickel Chromium | ||||
| Brightray S | Ni 6076 | – | NC 80/20 | Ni-Cr and Ni-Cr-Fe filler metals may be used |
| Nimonic 75 | Ni 6076 | – | NC 80/20 | |
| Nickel-Chromium-Iron | ||||
| Alloy 800 | Ni 6625 | ERNiCrMo-3 | Monel 625 Thermanit 21/33 |
Usually welded with Ni-Cr-400 alloys, but more nearly matching consumables are available which contain higher C and also Nb |
| Alloy 400 | Ni 6082 | ERNiCr-3 | Monel 82 | Matching filler metal contains Nb addition |
| Alloy 718 | Ni 7718 | ERNiFeCr-2 | Monel 718 | Matching filler metal is normally used but Alloy 625 is an alternative consumable , if postweld heat treatment is not applied |
| Nickel-Chromium-Molybdenum | ||||
| Alloy 625 | Ni 6625 | ERNiCrMo-3 | Monel 625 | Filler metal is also used widely for cladding and dissimilar welds |
| Monel C-22 | Ni 6022 | ERNiCrMo-10 | Monel C-22 | |
| Nickel-Molybdenum | ||||
| Monel B-2 | Ni 1066 | ERNiMo-7 | Monel B-2 | Corrosion resistant alloys require matching fillers |
Monel 400 Pipe stock related Searches
2.5 inch Monel 400 pipe, ERW Monel 400 pipe, 12 inch Monel 400 pipe, Alloy 400 pipes, 400 Monel 2 inch pipe, 400 Monel pipe, Alloy 400 pipes manufacturers, Alloy 400 pipe price, 12mm Monel 400 Pipe, 400 Monel Pipe manufacturers, Monel 400 pipe price, thin wall 400 Monel pipe, 40mm Monel 400 Pipes, CDW Monel 400 Pipe, Fabricated Monel 400 Pipe, 4 inch 400 Monel pipe price, 400 Monel pipe manufacturers, 400 Monel Bush Hex pipes, 400 Monel piping wall thickness, Alloy 400 pipe, Monel 400 pipe manufacturers, large diameter 400 Monel pipe, 400 Alloy pipe, 8 inch Monel 400 pipe, 1 inch 400 Monel pipe, 400 Monel pipe 2 inch, Alloy 400 pipe, 10mm Monel 400 Pipe, Monel 400 Cold Drawn Seamless Pipe, marine Monel 400 Piping, thick wall 400 Monel pipe, large 400 Monel pipe, 400 Monel welded pipe, 3 inch Monel 400 pipe, Monel 400 pipe price per foot.
Monel 400 Pipe Price
| PRODUCT NAME | PACK QTY | PRICE |
|---|---|---|
| 6.35mm dia x0.9mm wall x 500mm long | 1 |
£53.00
|
| 6.35mm dia x0.9mm wall x 500mm long | 5 |
£166.00
|
| 6.35mm dia x0.9mm wall x 500mm long | 10 |
£296.00
|
| 6.35mm dia x0.9mm wall x 1000mm long | 1 |
£72.00
|
| 6.35mm dia x0.9mm wall x 1000mm long | 5 |
£264.00
|
| 6.35mm dia x0.9mm wall x 1000mm long | 10 |
£475.00
|
| 6.35mm dia x0.9mm wall x 2000mm long | 1 |
£111.00
|
| 6.35mm dia x0.9mm wall x 2000mm long | 5 |
£443.00
|
| 6.35mm dia x0.9mm wall x 2000mm long | 10 |
£800.00
|
| 6.35mm dia x0.9mm wall x 3000mm long | 5 |
£556.00
|
Client Reference and Applications
RWE Generation UK
Little Barford Power Station, Saint Neots PE19 6YT, UK
Energy UK
Charles House, 5-11 Regent St, St. James’s, London SW1Y 4LR, UK
Kapar Energy Ventures
Kampung Tok Muda, 45X Kapar, Selangor, Malaysia
Stesen Janaelektrik Sultan Salahuddin Abdul Aziz
Jalan Tok Muda, Selangor, Kampung Tok Muda, 42200 Kapar, Selangor, Malaysia
Dana Water Heaters & Coolers Factory llc
Dubai – United Arab Emirates
Ontario Power Generation Inc
700 University Ave, Toronto, ON M5G 1Z5, Canada
Hydro One
483 Bay St, Toronto, ON M5G 1P5, Canada
ABB Australia
Karratha Industrial Estate WA 6714, Australia
Energy Brix Australia Corp.
412 Commercial Rd, Morwell VIC 3840, Australia
AKSA Power Generation USA
371 Exchange St, West Monroe, LA 71292, USA
Siemens Energy
8060 Flint St, Lenexa, KS 66214, USA
Tuas Power Generation
60 Tuas South Avenue 9, Singapore 637607
Cummins Power Generation (S) Pte Ltd
10 Toh Guan Rd, Singapore 608838
Barakah Nuclear Power Plant
Barakah – Abu Dhabi – United Arab Emirates
Power Electric Switchgear Factory
Abu Dhabi – United Arab Emirates
Shams Solar Power Station
Madinat Zayed- Al Gharbia- – Abu Dhabi – UAE
Hassyan Power Plant
Dubai – United Arab Emirates
AKSA Power Generation FZE
Jebel Ali Free Zone – Dubai – United Arab Emirates
Al Mirfa Power and Desalination Plant
Al Mirfa – Abu Dhabi – United Arab Emirates
U-Power Generation FZC
Sharjah International Airport – Sharjah – United Arab Emirates
Fujairah F2 Plant
Fujairah – United Arab Emirates
Fayfa Chemicals Factory LLC
22A, AL QUOZ INDUSTRIAL AREA 3 – Dubai – United Arab Emirates
Monel 400 Seamless Pipe, Sch40 Monel 400 Pipe & Monel Alloy 400 Welded Pipe Stock
| BEST PRICE OF | ||
|---|---|---|
|
|
|
Monel 400 Pipe Supplier
Monel 400 Pipe supplier
Aberdeen, Abu Dhabi, Ahmedabad, Ahvaz, Al Jubail, Al Khobar, Algiers, Ankara, Atyrau, Bangkok, Baroda, Bengaluru, Bhopal, Bogota, Brisbane, Busan, Cairo, Calgary, Caracas, Chandigarh, Chennai, Chiyoda, Coimbatore, Colombo, Courbevoie, Dallas, Dammam, Doha, Dubai, Edmonton, Ernakulam, Faridabad, Geoje-si, Gimhae-si, Granada, Gurgaon, Hanoi, Haryana, Ho Chi Minh City, Hong Kong, Houston, Howrah, Hyderabad, Indore, Istanbul, Jaipur, Jakarta, Jamshedpur.
Jeddah, Kanpur, Karachi, Kolkata, Kuala Lumpur, Kuwait City, La Victoria, Lagos, Lahore, London, Los Angeles, Ludhiana, Madrid, Manama, Melbourne, Mexico City, Milan, Montreal, Moscow, Mumbai, Muscat, Nagpur, Nashik, Navi Mumbai, New Delhi, New York, Noida, Perth, Petaling Jaya, Pimpri-Chinchwad, Port-of-Spain, Pune, Rajkot, Ranchi, Rio de Janeiro, Riyadh, Santiago, Secunderabad, Seoul,Sharjah,Singapore, Surat, Sydney, Tehran, Thane, Thiruvananthapuram, Toronto, Ulsan, Vadodara, Visakhapatnam, Vung Tau.
Monel 400 Pipe supplier
Afghanistan, Algeria, Angola, Argentina, Australia, Austria, Azerbaijan, Bahrain, Bangladesh, Belarus, Belgium, Bhutan, Bolivia, Brazil, Bulgaria, Canada, Chile, Chile, China, Colombia, Costa Rica, Croatia., Czech Republic, Denmark, Ecuador, Egypt, Estonia, Finland, France, Gabon, Gambia, Germany, Ghana, Greece, Hong Kong, Hungary, India, Indonesia, Iran, Iran, Iraq, Ireland, Israel, Italy, Japan, Jordan, Kazakhstan, Kenya, Kuwait.
Lebanon, Libya, Lithuania, Macau, Malaysia, Mexico, Mexico, Mongolia, Morocco, Namibia, Nepal, Netherlands, New Zealand, Nigeria, Nigeria, Norway, Oman, Pakistan, Peru, Philippines, Poland, Poland, Portugal, Puerto Rico, Qatar, Romania, Russia, Saudi Arabia, Serbia, Singapore, Slovakia, South Africa, South Korea, Spain, Sri Lanka, Sweden, Switzerland, Taiwan, Thailand, Tibet, Trinidad & Tobago, Tunisia, Turkey, Ukraine, United Arab Emirates, United Kingdom, United States, Venezuela, Vietnam, Yemen, Zimbabwe.